Colony Air Conditioning & Heating 4905 Westport Drive The Colony, TX 75056 - Phone: 972.625.0639
Store Categories
Note: Online pricing reflects inventory and cost savings which may not be available directly through our office.
1-Inch Pleated Filters

Pleated air filters are 5 times more efficient than typical 1" fiberglass filters and are recommended where increased air quality is desired.

* All measurements are expressed in inches

2" Pleated Filters

Proprietary Media - Assures Rated Efficiency

MERV values and dust holding capacity are verified by QC checks on incoming raw materials, production line sampling and field audits of finished goods.

All filters are designed with a consistent pleat shape on predetermined centers causing dirt to collect evenly over the entire surface of the media. Fully utilizing every square inch results in a slow steady rise in resistance for maximum dust holding capacity. Consistent pleat alignment enhances dust holding capacity for longer service life. Support grid is made of galvanized steel for maximum rust resistance and to maintain the pleated shape and prevent fluttering in operation. Double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity. The adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent. The pleats hold together even when wet. No delaminating, no excessive buckling, no collapsing.

* All measurements are expressed in inches

4-Inch Pleated Filters
 
All filters are designed with a consistent pleat shape on predetermined centers causing dirt to collect evenly over the entire surface of the media. Fully utilizing every square inch results in a slow steady rise in resistance for maximum dust holding capacity. Consistent pleat alignment enhances dust holding capacity for longer service life. Support grid is made of galvanized steel for maximum rust resistance and to maintain the pleated shape and prevent fluttering in operation. Double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity. The adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent. The pleats hold together even when wet. No delaminating, no excessive buckling, no collapsing.

* All measurements are expressed in inches

Generic 1-Inch Fiberglass Filters

Designed for general air filteriing these disposable filters are designed for ease of replacement and use. They are available in a wide range of sizes and are used in all types of HVAC systems to protect the system from dirt. Color of fiberglass may vary.

Note: Color of fiberglass may vary

* All measurements are expressed in inches

Honeywell FC100A Replacement Media

OEM Honeywell Replacement Media - FC100A

Original Honeywell MERV 10 Factory Replacement Filter

Ultra-Web technology is exclusive to high-efficiency Honeywell Media Air Cleaners. Media air filters, at the microscopic level, consist of an interlocking network of fibers that appear quite porous. This porosity is necessary to allow air to pass through the unit with minimal pressure drop. The interlocking fibers of the Ultra-Web material form a web that captures particles that pass right through them. The particles are captured three different ways:

  • Diffusion: The random trajectory of many particles, jostled by molecules, carries them directly into the path of the fiber
  • Impaction: Many particles are too heavy to move out of the path of a fiber, so they slam into a fiber and stick
  • Interception: Random air current cause particles to sweep too close to a fiber, and due to molecular attraction, the fiber grabs the particle

For optimum system performance, replace the filter every six months (before heating season and before cooling season). Adjust the schedule to your needs, but replace the filter at least annually.

* All measurements are expressed in inches

Store Categories